HDPE Siphon Pipe
short description:
Introduction:
Siphon rainwater drainage system is a new technology which is developed very fast in Europe, American, Japan, South-American, Asia and Africa countries. It is a more scientific and advanced technology, can be used on big construction building like factory, workshop, warehouse and public building. The inner drainage system has obviously advantages comparing with the traditional gravity current drainage system.
Detailed Information:
Specification
| Straight Series | |||||
| Nominal Diameter | S16 | S25 | |||
| DN(mm) | Tolerance (mm) | Wall Thickness (mm) | PN(Mpa) | Wall Thickness(mm) | PN(Mpa) |
| 32 | +0.3 | — | — | 3.0 | 1.3 |
| 40 | +0.4 | — | — | 3.0 | 1.1 |
| 50 | +0.5 | — | — | 3.0 | 0.8 |
| 63 | +0.6 | — | — | 3.0 | 0.7 |
| 75 | +0.7 | — | — | 3.0 | 0.5 |
| 90 | +0.8 | — | — | 3.5 | 0.5 |
| 110 | +0.8 | — | — | 4.2 | 0.5 |
| 125 | +0.9 | — | — | 4.8 | 0.5 |
| 160 | +1.0 | — | — | 6.2 | 0.5 |
| 200 | +1.1 | 6.2 | 0.4 | 7.7 | 0.5 |
| 250 | +1.3 | 7.8 | 0.4 | 9.6 | 0.5 |
| 315 | +1.5 | 9.8 | 0.4 | 12.1 | 0.5 |
| Coil Series | |||||
| Nominal Diameter | S16 | Length: M/Roll | |||
| DN(mm) | Tolerance(mm) | Wall Thickness(mm) | PN(Mpa) | ||
| 32 | +1.4 | 3.0 | 1.3 | 50, 100, 200, 300, 500 | |
| 40 | +1.5 | 3.0 | 1.1 | ||
| 50 | +1.6 | 3.0 | 0.8 | 50, 100, 200 | |
| 63 | +1.7 | 3.0 | 0.7 | 50, 100 | |
Properties
| Project | Requirement |
| Longitudinal reversion(110℃) | ≤3% No delamination, cracking and blistering |
| MFR (5kg, 190℃)/(g/10min) | 0.2≤MFR≤1.1The MFR difference between the raw material particles should not exceed 0.2 |
| Oxidation induction time(200℃/min) | ≥20 |
| Hydrostatic strength test(80℃, 165h, 4.6Mpa) | No broken, no leakage |
| Ring stiffness (KN/m3)Only for the pipes with a “BD” represents | SR≥4 |
| Combustion toxicity index | ≤1 |
System CompositionThesiphondrainagesystemismainlycomposedofrainwaterhead,fasteningsystems,HDPEpipeandthecorrespondingdesignsoftware.System AdvantagesCompared with the traditional gravity drainage system, the siphon drainage system has advantages as follows:1. None-slope pipe.2.Lessmaterial used.
3.Theconstructioncost isgreatlyreduced.
4.Reducing therequirement of pipes’diameter.
5.Saveinstallationspace.
6.The pipehasits self-cleaningfunction.
7.Thedesign andinstallationissimpleandquick.
8.Widelyapplicabletovarious buildings.
Features:
1. UVresistance,ageingresistance,longservicelifeof50years.
2. Smoothinnerwall andtiny frictionalresistance.
3. Thepressurelossis about30%lessthanthesteeltube, so smallerdiameter of HDPE pipe could be chose.
4.Health performance is good. No additives and no possibility of pollution of drinking water,ISO standard gradingpolyethylene material
level is0 (the lowest)and no mildew material. Compared with some other commonly used plastic material, PE is much mildew resistance and it could be used for a long time without fouling.
5. PEpipecanbewelded to beanorganicwhole system.
Application: